====== YEASU FT-857 ======
{{:ham:17454778_390293031353743_840908175_o.jpg?800|}}\\
http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&encProdID=8CBB7C4BDBAF40129AD4253A4987523C\\
http://www.qsl.net/ok1if/FT857/ft857.htm\\
{{ :ham:ft-857_brochure.pdf |}}\\
{{ :ham:ft-857d_om_eng_eh007m102_v2.pdf |}}
===== USB-62C linux Ubuntu =====

<code>
dmesg
[  587.204020] usb 2-1: new full-speed USB device number 8 using uhci_hcd
[  587.408040] usb 2-1: New USB device found, idVendor=2100, idProduct=0e56
[  587.408045] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  587.408049] usb 2-1: Product: CT62C Radio Cable
[  587.408053] usb 2-1: Manufacturer: RT Systems
[  587.408056] usb 2-1: SerialNumber: RT8UCGT
</code>
<code>
sudo nano /var/lib/usbutils/usb.ids
</code>
<code>
2100  RT Systems
        0e56  USB-62C #add code of your cable
        9e52  Yaesu VX-7
        9e54  CT29B Radio Cable
        9e57  RTS01 Radio Cable
        9e5d  K4Y Radio Cable
        9e5f  FT232RL [RTS05 Serial Cable]

</code>
<code>
modprobe ftdi-sio
</code>
<code>
#nano /sys/bus/usb-serial/drivers/ftdi_sio/new_id
</code>
paste
<code>
2100 0e56
</code>
ctrl+x, yes
<code>
udevadm control --reload-rules
</code>
<code>dmesg
[  986.220018] usb 2-1: new full-speed USB device number 10 using uhci_hcd
[  986.420061] usb 2-1: New USB device found, idVendor=2100, idProduct=0e56
[  986.420067] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  986.420071] usb 2-1: Product: CT62C Radio Cable
[  986.420075] usb 2-1: Manufacturer: RT Systems
[  986.420078] usb 2-1: SerialNumber: RT8UCGT
[  986.428154] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
[  986.428211] usb 2-1: Detected FT-X
[  986.430136] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0
</code>
==== references ====
https://www.rtsystemsinc.com/USB-62-Programming-CAT-Cable-p/usb-62.htm\\
http://chirp.danplanet.com/projects/chirp/wiki/Home\\
https://ubuntuforums.org/showthread.php?t=2259068\\
===== CHIRP and YAESU FT-857 =====
Start TCVR by power button holding mode < & > as in picture below.\\

{{:ham:17521607_390293058020407_1085446336_o.jpg?400|}}
==== Downloading config from YAESU FT-857 to CHIRP ====
Select Radio > Download from radio\\
{{:ham:snimek_obrazovky_porizeny_2017-03-25_00-12-01.png?400|}}\\
Press key C for sending.\\
{{:ham:17373204_390293068020406_1250872070_o.jpg?400|}}\\
==== Uploading config from CHIRP to YAESU FT-857 ====
For uploading configuration from CHIRP to TCVR select first RCV by key A\\
{{:ham:17499743_390293091353737_1125342634_o.jpg?400|}}\\
And after you can upload config.\\
{{:ham:snimek_obrazovky_porizeny_2017-03-25_00-12-01.png?400|}}\\