Differences

This shows you the differences between two versions of the page.

--- ham:sdr [2017/02/22 23:41] – tomas
+++ ham:sdr [2020/12/11 16:20] (current) – external edit 127.0.0.1
@@ Line 10: / Line 10: @@
 {{:ham:whatsapp_image_2017-02-20_at_10.14.47.jpeg?400}}
+===== openwebrx =====
+[[http://sdr.hu/openwebrx|Openwebrx]] jsem také musel vyzkošet na Raspberry Pi 3.
+{{:ham:screenshot.png?400|}}
+Od kolegy [[http://ha5kfu.sch.bme.hu/openwebrx-quick-setup|HA5KFU]] hezky zpracovaná bashová dávka včetně věcných komentářů. Vše funguje na první dobrou. Kód je možné spustit ze souboru.
+<code>
+sudo apt-get install build-essential git libfftw3-dev cmake libusb-1.0-0-dev nmap
+#nmap itself is not used by OpenWebRX at all, but we need to install it because the ncat tool is packaged with it.
+#ncat is a netcat alternative which is used by OpenWebRX for internally distributing I/Q data,
+#  and also solves the incompatibility problems among netcat versions.
+#Fetch and build rtl-sdr, skip if already done (subdirectories will be created under the current directory).
+git clone git://git.osmocom.org/rtl-sdr.git
+cd rtl-sdr/
+mkdir build
+cd build
+cmake ../ -DINSTALL_UDEV_RULES=ON
+make
+sudo make install
+sudo ldconfig
+cd ../..
+#Disable the DVB-T driver, which would prevent the rtl_sdr tool from accessing the stick
+#(if you want to use it for DVB-T reception later, you should undo this change):
+sudo bash -c 'echo -e "\n# for RTL-SDR:\nblacklist dvb_usb_rtl28xxu\n" >> /etc/modprobe.d/blacklist.conf'
+sudo rmmod dvb_usb_rtl28xxu # disable that kernel module for the current session
+#Download OpenWebRX and libcsdr (subdirectories will be created under the current directory).
+git clone https://github.com/simonyiszk/openwebrx.git
+git clone https://github.com/simonyiszk/csdr.git
+#Compile libcsdr (which is a dependency of OpenWebRX)
+cd csdr
+make
+sudo make install
+#Edit OpenWebRX config or leave defaults
+nano ../openwebrx/config_webrx.py
+#Run OpenWebRX
+cd ../openwebrx
+./openwebrx.py
+</code>
+===== Gqrx =====
+[[http://gqrx.dk/|Gqrx]]
+{{:ham:snimek_obrazovky_porizeny_2017-02-22_23-52-07.png?400|}}
+<code>
+sudo add-apt-repository -y ppa:bladerf/bladerf
+sudo add-apt-repository -y ppa:ettusresearch/uhd
+sudo add-apt-repository -y ppa:myriadrf/drivers
+sudo add-apt-repository -y ppa:myriadrf/gnuradio
+sudo add-apt-repository -y ppa:gqrx/gqrx-sdr
+sudo apt-get update
+sudo apt-get install gqrx-sdr
+sudo apt-get install libvolk1-bin
+volk_profile
+#be patient :)))
+sudo reboot
+</code>